RTS 2 channel intercom

[Richard Crowley]

<shadowterrace@***********m> wrote ...
>I have a RTS intercom system in a small TV studio. There are four
> belt packs - three cameras and a floor manager - as well as an IFB.
> The camera belt packs are single channel (channel 1), the floor
> manager is two channel selectable and the IFB is single channel
> (channel 2). The base station is set up for two wire operation.
>
> My problem is that all stations can hear both channels. I don't
> understand how the camera belt packs can hear both channels, since
> they are supposed to only receive a single channel. Can someone help
> me?
>
>
> Here is my equipment list:
>
> MCE325 User Station / MCS325 Speaker
> PS-15 Power Sup[ply
> (3) BP-319 Belt Packs for cameras
> (1) PB-351 Belt Pack for floor manager
> (1) IFB-325 for talent
> (5) PH-1R5 5 pin headsets

Are you certain that the system is wired and configured as you
want to use it? Is it a recent installation? Did it always work
like this, or is this a recent phenomenon?

The solution is highly dependent on that specific equipment and
how it is wired/configured in your studio. Unless someone else
here has similar equipment (which appears doubtful), you may
need to contact the manufacturer or dealer (or find some other
user of similar equipment).

[Richard Crowley]

"MG" wrote ...
> "Larry in AZ" wrote...
>> My guess is that somewhere in his system, he's got a wire with pins 2/3
>> reversed...
>>
>
> Or a short somwehere.

Or simply too many buttons on the master station and nobody
who knows exactly how to operate it? We just don't know
because the OP has never replied.

[pfslreynolds]

On May 7, 12:33*pm, shadowterr...@***********m wrote:
> I have a RTS intercom system in a small TV studio. *There are four
> belt packs - three cameras and a floor manager - as well as an IFB.
> The camera belt packs are single channel (channel 1), the floor
> manager is two channel selectable and the IFB is single channel
> (channel 2). *The base station is set up for two wire operation.
>
> My problem is that all stations can hear both channels. *I don't
> understand how the camera belt packs can hear both channels, since
> they are supposed to only receive a single channel. *Can someone help
> me?
>
> Here is my equipment list:
>
> MCE325 User Station / MCS325 Speaker
> PS-15 Power Sup[ply
> (3) BP-319 Belt Packs for cameras
> (1) PB-351 Belt Pack for floor manager
> (1) IFB-325 for talent
> (5) PH-1R5 *5 pin headsets

There are many ways to set up the MCE 325 Find a manuel online and
redo the options.