 Amp meter + shunt installation problem
Hi,
Try powering the amp meter from a separate battery, see if it works OK
then.
cheers,
Pete.
> I fitted the Amp meter & shunt exactly as shown on the directions,
> however even with no wires connected to the outlet side of the shunt
> the I get a -10.5 amp discharge showing. With the alternator charging
> nothing changes, and an 8w 12v fluorescent shos an additional 10 amp
> discharge.
>
> The instructions did not show a direction to fit the shunt so I assume
> it is bi-directional.
>
> Anyone got any ideas on what's going on?
>
> Thanks
>
> Biggles
| 
