TRAVEL.com ® Travel Forums - View Single Post

10th May 2008, 04:51 AM

Scott Moore <samiam@moorecad.com> wrote

>Has anyone managed to figgure out a fix for this dog?
>
>In order to get a GPS card programmed using the Jeppesen
>Skybondage adapter, I have to restart the application
>over and over, it is continually deciding that the
>card in the unit has 0 (zero) memory. It even tests
>green using the applications "test card", then fails,
>and then fails the test after that.
>
>I was able to lessen the effect by plugging it directly
>into a slot on the back of the computer. However, it
>is still there and still annoying. It takes about 2-3
>times on average of restarting and replugging everything
>to get it to work.
>
>Thanks.

I have no idea if this helps but if this is a USB attached device, try
different PCs.

My KLN94 CF programmer (an obsolete Sandisk SDDR31 being the only
option) works in just ONE of a half a dozen PCs I have access to.

10th May 2008, 04:51 AM	#1 (permalink)
Peter Guest Posts: n/a Classified Rating: % ()	Jeppesen skybound Scott Moore <samiam@moorecad.com> wrote >Has anyone managed to figgure out a fix for this dog? > >In order to get a GPS card programmed using the Jeppesen >Skybondage adapter, I have to restart the application >over and over, it is continually deciding that the >card in the unit has 0 (zero) memory. It even tests >green using the applications "test card", then fails, >and then fails the test after that. > >I was able to lessen the effect by plugging it directly >into a slot on the back of the computer. However, it >is still there and still annoying. It takes about 2-3 >times on average of restarting and replugging everything >to get it to work. > >Thanks. I have no idea if this helps but if this is a USB attached device, try different PCs. My KLN94 CF programmer (an obsolete Sandisk SDDR31 being the only option) works in just ONE of a half a dozen PCs I have access to.