TRAVEL.com ® Travel Forums - View Single Post

25th April 2008, 03:45 PM

I have pealed the felt back and pop-riveted on a handle with the rivet
head on the inside and a washer on the outside, using 1/8" aluminum
rivets. Then contact cement the felt back in place. Worked for me.
JJ

Tuno wrote:
> The tail dolly for my new WalletWhomper II came without a handle on
> top. I want to add one. I am betting that drilling holes and using
> flathead machine screws from inside will still endanger the fuse
> boom.
>
> Any hot tips? (Besides "If you have to ask, don't do it.")
>
> 2NO

25th April 2008, 03:45 PM	#2 (permalink)
JJ Sinclair Guest Posts: n/a Classified Rating: % ()	Getting a handle on the tail dolly I have pealed the felt back and pop-riveted on a handle with the rivet head on the inside and a washer on the outside, using 1/8" aluminum rivets. Then contact cement the felt back in place. Worked for me. JJ Tuno wrote: > The tail dolly for my new WalletWhomper II came without a handle on > top. I want to add one. I am betting that drilling holes and using > flathead machine screws from inside will still endanger the fuse > boom. > > Any hot tips? (Besides "If you have to ask, don't do it.") > > 2NO